Heat transfer enhancement and drag reduction of a flat plate normal to the airstream (flow control using a rod)

1998 ◽  
Vol 27 (2) ◽  
pp. 99-113 ◽  
Author(s):  
Tamotsu Igarashi ◽  
Nobuaki Terachi
Keyword(s):  
Heat Transfer ◽  
Drag Reduction ◽  
Flow Control ◽  
Flat Plate ◽  
Heat Transfer Enhancement ◽  
Transfer Enhancement

scholarly journals Nature-Inspired Structures Applied in Heat Transfer Enhancement and Drag Reduction

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 656
Author(s):  
Zhangyu Zhu ◽  
Juan Li ◽  
Hao Peng ◽  
Dongren Liu
Keyword(s):  
Heat Transfer ◽  
Drag Reduction ◽  
Heat Transfer Enhancement ◽  
Optimization Design ◽  
Pump Energy ◽  
Research Review ◽  
Transfer Enhancement ◽  
Nano Structure ◽  
Transfer Structure ◽  
Biomimetic Structures

Heat exchangers are general equipment for energy exchange in the industrial field. Enhancing the heat transfer of a heat exchanger with low pump energy consumption is beneficial to the maximum utilization of energy. The optimization design for enhanced heat transfer structure is an effective method to improve the heat transfer coefficient. Present research shows that the biomimetic structures applied in different equipment could enhance heat transfer and reduce flow resistance significantly. Firstly, six biomimetic structures including the fractal-tree-like structure, conical column structure, hybrid wetting structure, scale structure, concave-convex structure and superhydrophobic micro-nano structure were summarized in this paper. The biomimetic structure characteristics and heat transfer enhancement and drag reduction mechanisms were analyzed. Secondly, four processing methods including photolithography, nanoimprinting, femtosecond laser processing and 3D printing were introduced as the reference of biomimetic structure machining. Finally, according to the systemic summary of the research review, the prospect of biomimetic heat transfer structure optimization was proposed.

Optimal Position of Rectangular Vortex Generator for Heat Transfer Enhancement in a Flat-Plate Channel

2017 ◽  
Author(s):  
Tariq Amin Khan ◽  
Wei Li ◽  
Zhengjiang Zhang ◽  
Jincai Du ◽  
Sadiq Amin Khan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Numerical Simulations ◽  
Flat Plate ◽  
Heat Transfer Enhancement ◽  
Angle Of Attack ◽  
Vortex Generator ◽  
Transfer Enhancement ◽  
Optimal Position ◽  
Plate Channel

Heat transfer is a naturally occurring phenomenon which can be greatly enhanced by introducing longitudinal vortex generators (VGs). As the longitudinal vortices can potentially enhance heat transfer with small pressure loss penalty, VGs are widely used to enhance the heat transfer of flat-plate type heat exchangers. However, there are few researches which deal with its thermal optimization. Three dimensional numerical simulations are performed to study the effect of angle of attack and attach angle (angle between VG and wall) of vortex generator on the fluid flow and heat transfer characteristics of a flat-plate channel. The flow is assumed as steady state, incompressible and laminar within the range of studied Reynolds numbers (Re = 380, 760, 1140). In the present work, the average and local Nusselt number and pressure drop are investigated for Rectangular vortex generator (RVG) with varying angle of attack and attach angle. The numerical results indicate that the heat transfer and pressure drop increases with increasing the angle of attack to a certain range and then decreases with increasing angle of attack. Moreover, the attach angle also plays an importance role; a 90° attach angle is not necessary for enhancing the heat transfer. Usually, heat transfer enhancement is achieved at the expense of pressure drop penalty. To find the optimal position of vortex generator to obtain maximum heat transfer and minimum pressure drop, the data obtained from numerical simulations are used to train a BRANN (Bayesian-regularized artificial neural network). This in turn is used to drive multi-objective genetic algorithm (MOGA) to find the optimal parameters of VGs in the form of Pareto front. The optimal values of these parameters are finally presented.

The Application of Shape Memory Alloy as Vortex Generators and Flow Control Devices for Enhanced Convective Heat Transfer

2007 ◽  
Author(s):  
Mohd. S. Aris ◽  
Ieuan Owen ◽  
Chris. J. Sutcliffe
Keyword(s):  
Heat Transfer ◽  
Flow Control ◽  
Shape Memory ◽  
Convective Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Convective Heat ◽  
Vortex Generators ◽  
Transfer Enhancement ◽  
Flow Control Devices ◽  
Control Devices

This paper is concerned with convective heat transfer enhancement of heated surfaces through the use of vortex generators and flow control devices. A preliminary proof-of-concept investigation has been carried out into the use of active vortex generators and flow control elements, both manufactured from Shape Memory Alloys (SMAs) which are activated at set temperatures. The vortex generators change their shape to intrude further into the flow at high temperature to enhance heat transfer, while they maintain a low profile at low temperatures to minimise flow pressure losses. One set of vortex generators was made from pre-alloyed powders of SMA material in an advanced rapid prototyping process known as Selective Laser Melting (SLM). Another set of devices was also made from commercially available flat annealed thin SMA sheets for comparison purposes. The flow control elements are devices that preferentially guide the flow to heated parts of a surface, again using temperature-activated SMAs. Promising results were obtained for both the vortex generator and flow control device when their temperatures were varied from 20° to 85°C. The vortex generators responded by increasing their angle of attack from 20° to 35° while the wavy flow control elements straightened out at higher temperatures. As the designs were two-way trained, they regain their initial position and shape at a lower temperature. The surface temperature of the heated plate on which the active devices were positioned reduced between 8 to 51%, indicating heat transfer enhancement due to the generated vortices and changes in air flow rates.

scholarly journals A Numerical and Experimental Investigation of Dimple Effects on Heat Transfer Enhancement with Impinging Jets

Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 813 ◽  
Author(s):  
Parkpoom Sriromreun ◽  
Paranee Sriromreun
Keyword(s):  
Heat Transfer ◽  
Flat Plate ◽  
Heat Transfer Enhancement ◽  
Air Flow ◽  
Flow Characteristics ◽  
Jet Impingement ◽  
Impinging Jets ◽  
Transfer Enhancement ◽  
Test Plate ◽  
Hot Surface

This research was aimed at studying the numerical and experimental characteristics of the air flow impinging on a dimpled surface. Heat transfer enhancement between a hot surface and the air is supposed to be obtained from a dimple effect. In the experiment, 15 types of test plate were investigated at different distances between the jet and test plate (B), dimple diameter (d) and dimple distance (Er and Eθ). The testing fluid was air presented in an impinging jet flowing at Re = 1500 to 14,600. A comparison of the heat transfer coefficient was performed between the jet impingement on the dimpled surface and the flat plate. The velocity vector and the temperature contour showed the different air flow characteristics from different test plates. The highest thermal enhancement factor (TEF) was observed under the conditions of B = 2 d, d = 1 cm, Er= 2 d, Eθ = 1.5 d and Re = 1500. This TEF was obtained from the dimpled surface and was 5.5 times higher than that observed in the flat plate.

Sign in / Sign up

Export Citation Format

Share Document